• Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12
  • Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12
  • Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12
  • Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12
Complete Front To Back Light Bulb Kits
Complete Front To Back Light Bulb Kits

Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12

Borg Warner
Was: $5,155.89
Now: $4,852.55
(1 review) Write a Review

SKU:
ODSL12
Availability:
In stock
Adding to cart… The item has been added

Product Description Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12

NEW Borg Warner R-10 R-11 Overdrive Solenoid 12 Volts 
Comes fully tested with new solenoid to transmission seal.

This is the same solenoid used by all eleven of the car companies that offered the Borg Warner electric overdrive as an option from the late 1930's through the early 1960's. This solenoid will fit standard Borg Warner overdrive applications with a shaft length of 1", measured from the tip of the shaft to the edge of the alignment flange. (lay your ruler on top of the shaft and measure from the ball end to the edge of the casting). All standard overdrive-solenoids will measure 1". Wagons, convertibles and Lincoln's will measure 1.5 inches and a few odd applications will measure 1.25 inches or longer.


This solenoid fits the STANDARD 1" applications. Please check you shaft length before ordering. MEASURE SHAFT LENGTH BEFORE ORDERING TO MAKE SURE YOURS IS 1 INCH IN LENGTH.
Click for wire diagram
Solenoid wiring terminals with the solenoid in hand and the shaft facing out in front of you, the right hand terminal is number four and connects to the relay. The left hand terminal connects to the kick down switch. A small amount of solenoids had a third wire that was a ground if yours is one of those check your shop manual and it will confirm where the third wire goes. Most solenoids had screw in terminals, a few had internal connections with wires coming out of the solenoid. Wiring connections for both are the same.

When changing the solenoid we recommend always changing the seal in the transmission. This will prevent oil from entering into your new solenoid.
There is a seal in the solenoid itself that can;t be changed in the field. The seal that you can change is in the transmission where the shaft goes through.


Installation Instructions
 

Questions about the Borg Warner Overdrive R-10 R11 Solenoid 12 volts with new seal ODSL12?

Vintage Auto Garage is here to help you with all of your classic car auto parts. If you need help finding the products you need to complete the restoration or repair of your vintage American car or truck, our team can walk you through the parts that you need, help you install them, and more. Give us a call during normal business hours and one of our team members will be able to provide you with personalized assistance.

Warranty Information

Vintage Auto Garage LLC offers a one year [12 months] limited warranty on products sold to the original owner. The limited warranty applies to items sold to be free from defects in material and workmanship. Vintage Auto Garage LLC is not responsible for any consequential damages caused by items sold or installed. This warranty covers the replacement/repair of the product only and does not cover the cost of removal and installation. Light bulbs are not covered under any warranty, if your order arrives with damaged bulbs caused by shipping, Vintage Auto Garage LLC will replace the light bulb at no charge. There is no warranty on parts that have been modified, painted, altered or not correctly installed. Some parts carry a longer manufacture limited warranty, in this case Vintage Auto Garage LLC will cover the first year [12 months] warranty and the manufacture would cover the remaining warranty period. Battery cables manufactured by Vintage Auto Garage LLC have a lifetime limited warranty to the original buyer. Extended warranty coverage can be purchased separately for some products that would extend the normal warranty by [12 months], [24 months] or [36 months]. Contact us if you would like more information on extended warranty or add to cart when making your purchase.

Product Reviews

Write a Review

1 Review

  • 5
    OD issues

    Posted by Jerry on Apr 26th 2024

    I thought you might like a comment from someone without a problem for a change. My old Ford's Borg Warner overdrive has mystified me and intimidated me for decades. Thanks to you, your products, the included documentation and diagrams, and YouTube videos, that is no longer an issue! I just finished installing a new 12V solenoid from you. It appears to work flawlessly. And it was easy! Thanks for all you do!