GMC 12 Volt Conversion Kits

Starter push button universal dash mount-52-600

Dash pushbutton starter mounts new start button to dash  Simply mount the start button, wire to any starter motor solenoid and ready to convert or upgrade an vehicle to push button electric start. This can be used as ground activated or power...

Key switch lead and fuse kit-KSL50

This kit connects voltage from battery source to the key switch. Provides sufficent current to operate starter solenoid voltage and power accessory. Includes 50 amp fuse and fuse holder. Recommened when powering accessories such as: Radios, overdrive...

Electric Starter Key Switch ACC, OFF, IGN, Start, and IGN/START. with Fuse Protection - WKS1

Electric starter switch kit. Kit Includes: Ignition key switch with 2 keys (meaures 3" total switch length) 3/4" mounting hole Wiring to connect switch to starter motor (8 feet long) Wire connector kit 15 amp blade fuse The 4 position switch has ACC,...

Starter push button dash kit-WPS1

Dash pushbutton starter kit mounts new start button to dash with wiring. No Key Switch included with this kit. Simply mount the start button, wire to any starter motor solenoid and ready to convert or upgrade an vehicle to push button electric start...

1937-1963 GMC Chevy OHV 6 228, 235 and others - BKT216302

1939-1968 GMC, Chevy, Pontiac  6 cylinder  alternator bracket.   Fits GMC: 228, 235, 246, 248, 256, 270, 302 6 cylinder engines.  Chevrolet: 1937-first series 1955 216, 235, 261 6 cylinder engines.  Pontiac: 261 engines (261...

Pushbutton starter kit with Off-Ign key switch kit WPS2

2-Position Igition Off-Ign key switch "shorty" 2.0" total length with dash starter pushbutton. Includes: WPS1 push starter dash button KS2  2 position key switch Off-Ign  Visit our other ignition and starter switches button and kits. ...

Pushbutton starter with Off-Acc-Ign key switch kit WPS3

3-Position Igition Off-Acc-Ign key switch "shorty" 2.0" total length with dash starter pushbutton. Includes: WPS1  push starter dash button KS3     3 position key switch Visit our other ignition and starter switches button and kits...

Starter pushbutton with 50 amp fuse Ignition kit WPS4

Dash starter pushbutton with 50 amp fuse, Wire direct from pushbutton to starter solenoid with fuse protection, no key switch required to operate  Includes: WPS1  push starter dash button KSL50  50 amp fuse Visit our other ignition and...

Starter pushbutton, 50 amp fuse Off/Ign switch kit WPS5

Dash starter pushbutton with 50 amp fuse, Wire direct from pushbutton to starter solenoid with fuse protection, no key switch required to operate  Includes: WPS1  push starter dash button KSL50  50 amp fuse KS2     Off/Ign...

Starter pushbutton, 50 amp fuse Off/Acc/Ign switch kit WPS6

Dash starter pushbutton with 50 amp fuse and on/off/acc key switch.  Includes: WPS1  push starter dash button KSL50  50 amp fuse KS3    Off/Acc/Ign key switch Visit our other ignition and starter switches button and kits...

Small block Chevy 283, 327, 350 - 153-168 tooth flywheels

Fits 153-168 teeth flywheels  Buicks 1964-1978 with V6 or V8 Engines Chevrolet cars and trucks small block 283,327,350  GMC 1963-1973   Oldsmobiles 1964-1981 Pontiacs 1964-1981 L6 L4 A gear reduction starter is a newer technology that...

Alternator 177 amps 100 amp high idle output - 7127-HP170

High output alternator 177 amp 100 amp idle output. Great for classics, RV's Trucks, with high demand electrical demands, A/C, fans, air suspension, high output audio systems, inverters.Alternator has the same mounting bolt pattern as the Delco 10Si and...

GMC 1956-1963, Gear Reduction Starter 12 Volts - 4150GR

Fits: the following GMC engines 270,302,316,336,347 CDI, all manual transmissions .  Will not work with foot pedal starter must install key switch kit to work.  High torque & more cranking speed All ball bearing construction Starter can be...

Chevrolet GMC 139 Tooth Flywheel Gear Reduction Starter 12 Volts - 3500GR

Fits: the following 139 teeth flywheel engines 216 235 228,248,270 CU In  Will not work with foot pedal starter must install key switch kit to work.  Chevrolet 1938-1954  216-235, all manual and automatic transmissions*Chevy 1937-47...

Chevrolet 1955-1962 Truck Starter Hydromatic Trans 12 Volts - 3644GR

Our 12 volt gear reduction starter fits all Chevrolet truck models from 1955 to 1962 with an 8 cylinder engine and automatic transmission, including: Chevy Task Force Pickup Truck Chevy C-10 Pickup Truck Chevy C-20 Pickup Truck Chevy Apache Pickup Truck...

GMC 1956-1962 Hydromatic transmission Gear Reduction Starter 12 volts - 4314GR

Fits 1956-1962 GMC Hydromatic transmissions High torque & more cranking speed All ball bearing construction Starter can be clocked in 3 different positions depending on clearance 10 pounds (much lighter than the old starter) Better cranking on high...

GMC Truck 1953 1955 Starter Hydro-Matic Transmissions Only 12 volts - 3536GR

This starter will only fit 139 teeth flywheels and GMC engines with Hydro Matic transmissions. High torque & more cranking speed All ball bearing construction Starter can be clocked in 2 different positions depending on clearance 8.3 pounds (much...

1937-1955 GMC OHV 6 12V Conversion Foot Pedal Start - GMC3955K-100

This kit fits GMC trucks 1937-1955 with manual foot pedal starter. GMC engines:216,235 228, 236, 248, 256, 261, 270, 302 cu in displacement. Kit includes: 100 amp GM black alternator (select wide 5/8" or narrow 3/8" pulley) new HD GMC Alternator Bracket,...

1950-1955 GMC OHV 6 12V Conversion Electric Starter - GMC5055K-100

This kit fits GMC trucks 1950-1955 with electric key starter. GMC engines: 228, 235, 236, 248, 256, 261, 270, 302 cu in displacement. Kit includes: 100 amp 3 wire GM black alternator (select wide 5/8" or narrow 3/8" pulley) new HD GMC Alternator Bracket,...

1939-1954 GMC OHV 6 Truck foot pedal 12V Conversion Kit- GMCP3954K

1939-1955 GMC Truck 12V Conversion kit Foot Pedal Start with PowerGen 90 amp Long Case alternator   GMC engines: 228, 236, 248, 256, 261, 270, 302 cu in displacement.Includes: PowerGen 90 amp 1 wire alternator, select 3/8 or 5/8 pulley,   10...