Product Description Ford 1937-1941 distributor Repair 6 volt Pos Grd electronic distributor -FDR3741-6P
Ford 1937-1941 Flathead V8 distributor rebuild customer owned to factory specs with electronic conversion.
6 volt positive ground electronic
Each distributor is complelely disassambled, cleaned, inspected replacing parts that are out of tolerance. Center rotor is measured for wear and replaced as needed, rotor side cap clearances are measured and aligned. New 6 volt positive ground Pertronix module is installed per the factory specs and properly set up for trouble free operation.
Terminal plates and caps are not included. If you need new loom tube boots click here SOLD EACH
The old 6 volt coil will be removed and replaced by our 3 screw coil adaptor kit that allows the installation of a remote coil use only CE1500 coil for these conversions.
Important information to know about electronic distributors.
12-Volt negative ground applications only. 2. DO NOT USE SOLID CORE SPARK PLUG WIRE. Use suppression or carbon type spark plug wires. 3. Warning!!! Leaving the ignition switch “ON” with the engine “OFF” for an extended period could result in permanent damage to the Ignitor. 4.The correct 1.5 OHM coil must be used to ensure proper operation. Includes coil wire from distributor to coil.
Allow 7-10 days turn around time plus shipping
Questions about the Ford 1937-1941 distributor Repair 6 volt Pos Grd electronic distributor -FDR3741-6P?
Vintage Auto Garage is here to help you with all of your classic car auto parts. If you need help finding the products you need to complete the restoration or repair of your vintage American car or truck, our team can walk you through the parts that you need, help you install them, and more. Give us a call during normal business hours and one of our team members will be able to provide you with personalized assistance.