Product Description Ford 1937-1941 distributor repair and conversion service-FDR3741
Ford 1937-1941 distributor with electronic conversion. Rework your distributor and convert to Pertronix electronic module and coil adaptor 2 screw.
Each distributor is complelely disassambled, cleaned, inspected replacing parts that are out of tolerance. Center rotor is measured for wear and replaced as needed, rotor side cap clearances are measured and aligned. New 12 volt negative ground Pertronix module is installed per the factory specs and properly set up for trouble free operation.
The old 6 volt coil will be removed and replaced by our coil adaptor kit that allows the installation of a remote coil.
Important information to know about electronic distributors.
12-Volt negative ground applications only. 2. DO NOT USE SOLID CORE SPARK PLUG WIRE. Use suppression or carbon type spark plug wires. 3. Warning!!! Leaving the ignition switch “ON” with the engine “OFF” for an extended period could result in permanent damage to the Ignitor. 4.The correct 1.5 OHM coil must be used to ensure proper operation.
This is not exchange service rather rework your own distributor allow 7-10 days turn around time plus shipping time.
Questions about the Ford 1937-1941 distributor repair and conversion service-FDR3741?
Vintage Auto Garage is here to help you with all of your classic car auto parts. If you need help finding the products you need to complete the restoration or repair of your vintage American car or truck, our team can walk you through the parts that you need, help you install them, and more. Give us a call during normal business hours and one of our team members will be able to provide you with personalized assistance.