Model A Ford 1928-1931 Electronic Original Look Distributor - 6 Volt positive ground- VZD-6P
Vintage Auto Garage Electronic Ignition Centrifugal Advance Original Look Distributor Kit.
6 Volt positive ground
The Electronic Ignition Centrifugal Advance Original Look Distributor performs the same great function of the original Electronic Ignition Centrifugal Advance Distributor but is encased in a stock-appearing cast-iron housing and utilizes the stock Model A cap and body. This is a Model A distributor stuffed with centrifugal weights and spring system and appears bone stock when compared side-by-side to the original, only a small increase in height is detected.
This is era correct looking ignitions for the Model A.
Comes standard with 26 + - degrees centrifugal advance which is standard. Or can be special order modified up to 35 degrees or advance for OHV engines. If you're running an OHV or any high powered flathead, you might find that 25 degrees or 32 degrees advance will improve your engine performance. We can provide the correct weights and springs or we can custom build to order.
The unit simply connects to the coil in the same wiring position as your original (pop-out switch cannot be used). There is no rat’s nest of multiple wires or an unsightly “black box” to hang on the firewall, and no condenser!
Distributor comes with a 1.5 ohm high energy heavy duty coil 40011, radio suppression coil wire, set of 4 brass spark plug connectors, dedicated ignition wire. Complete installation instructions, trouble-shooting guide, and a 30-month warranty.
You get world class power and absolute precision!
Available in 6-Volt, and 12-Volt