Product Description Ford Model A 12 volt Neg Ground Zipper Ignitor II with Modern Cap and Correct Coil - FSI-ZIP-II-12VNGK
Vintage Auto Garage Electronic Ignition Centrifugal Advance Stock cap Distributor Kit.
The Zipper II use a Pertronix II ignitor that will allow the key switch to remain on without buring up the module.
The Electronic Ignition Centrifugal Advance Stock Look Distributor performs the same great function of the original Electronic Ignition Centrifugal Advance Distributor but is encased in a stock-appearing cast-iron housing and utilizes a modern style cap that will accept radio resistance wires.
This Model A distributor is stuffed with centrifugal weights and spring system and appears bone stock when compared side-by-side to the original, except for the cap is modern style.
Must use radio resistance wires.
This is good solution for Model A owners that don't want to risk leaving the ignition on without the engine running and damaging the internal ignitor. (Great solution of more than one driver operates the vehicle)
Comes with Pertronix high output epoxy filled coil 45111 (low reistance) no ballast resistor needed.
Comes standard with 26 to 28 degrees centrifugal advance. Or can be modified up to 35 degrees or advance for OHV engines. If you're running an OHV or any high powered flathead, you might find that 25 degrees or 32 degrees advance will improve your engine performance. We can provide the correct weights and springs or we can custom build to order.
The unit simply connects to the coil in the same wiring position as your original (pop-out switch cannot be used). need to use universal key switch. There is no rat’s nest of multiple wires or an unsightly “black box” to hang on the firewall, and no condenser!
Complete installation instructions, trouble-shooting guide, and a 30-month warranty.
Questions about the Ford Model A 12 volt Neg Ground Zipper Ignitor II with Modern Cap and Correct Coil - FSI-ZIP-II-12VNGK?
Vintage Auto Garage is here to help you with all of your classic car auto parts. If you need help finding the products you need to complete the restoration or repair of your vintage American car or truck, our team can walk you through the parts that you need, help you install them, and more. Give us a call during normal business hours and one of our team members will be able to provide you with personalized assistance.
Warranty Information
Vintage Auto Garage LLC offers a one year [12 months] limited warranty on products sold to the original owner. The limited warranty applies to items sold to be free from defects in material and workmanship. Vintage Auto Garage LLC is not responsible for any consequential damages caused by items sold or installed. This warranty covers the replacement/repair of the product only and does not cover the cost of removal and installation. Light bulbs are not covered under any warranty, if your order arrives with damaged bulbs caused by shipping, Vintage Auto Garage LLC will replace the light bulb at no charge. There is no warranty on parts that have been modified, painted, altered or not correctly installed. Some parts carry a longer manufacture limited warranty, in this case Vintage Auto Garage LLC will cover the first year [12 months] warranty and the manufacture would cover the remaining warranty period. Battery cables manufactured by Vintage Auto Garage LLC have a lifetime limited warranty to the original buyer. Extended warranty coverage can be purchased separately for some products that would extend the normal warranty by [12 months], [24 months] or [36 months]. Contact us if you would like more information on extended warranty or add to cart when making your purchase.Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
great product
I operate model A cars and trucks that other people drive, these guys built this distributor that works so well and no worries about leaving the key sw on and burning up the module, PERFECT!!
