Delco CS130 Alternator Connector - DSC130
This plug is a wiring adapter that allows easy installation of an CS130 alternator 2 wire connection when converting from a generator. this plug is designed to snap into the connector at the back of any Delco CS130 internal regulated alternators. This plug along with the output wire to your ammeter is all you need to connect up an alternator into your vehicle.
The special feature of our plug is a diode that prevents voltage from your alternator to enter your ignition system allows shutting down of your engine when using the original on-off ignition switch. This plug adaptor acts as a source of current to excite or turn on the alternator at low RPM. This plug can also be used to power dash light (charge not charge light) The white wire is connected to the L terminal of the connector.
Modern cars with alternators idle faster than the older engines, most alternators are set to turn on around 1,200 RPM, older engines idle in the 600-800 RPM range, this plug tells the alternator to turn on at low RPM.