Chevrolet 1940-1956 139 Teeth Flywheel Gear Reduction Starter 12 Volts - 3500GR-C

Product Description

Chevrolet 1940-1956 139 Teeth Flywheel Gear Reduction Starter 12 Volts - 3500GR-C

Fits the following:
Chevy 1937-47 216-235 engines (need starter key switch kit)
Chevy 1948-1955 216-235 and V8 engines

Corvette 1953-1954 6 cylinder 

GMC1949-55' 228 & 248 cid
Willys Jeep CJ3A 46’-49 and all 50’-51’ (may need starter key switch kit if floor pedal starter)
Pontiac 1941-48 6 & 8 cylinder manual transmission (need starter key switch kit) . (3616GR)
Pontiac 1949-53 6 & 8 cylinder 145 teeth flywheel (3616GR)
Olds 1940-1948 6 & 8 cylinder (may need starter key switch kit) . (3601GR)
Olds 1949-1950 6 & 8 cylinder (3601GR)

To check the number of teeth on your flywheel, remove the starter and count the flywheel teeth.
If you have 168 teeth flywheel use product code 3599GR mainly used on truck engines

This is a gear reduction starter with a built in solenoid and will fit all 216 and 235 c.u. Chevrolet engines with electric key starter (not foot pedal) starter. Or you can convert your electrical system to electric key starter with our add on kit. See below.

High torque & more cranking speed

• All ball bearing construction
• Starter can be clocked in 3 different positions depending on clearance
• 8.3 pounds (much lighter than the old starter)
• Better cracking on high compression engines
• Comes with shims for proper fit
• 12 volts
• 9 teeth pinion gear measures 1.15" or 29mm (both the 3500GR and 3599GR have 9 teeth pinion gear difference is pitch and diameter of the gear)

Check starter app guide for correct starter application chick here

 

 

Width:

8.00 (in)

Height:

6.00 (in)

Depth:

5.00 (in)